Success usually comes to those who are too busy to be looking for it.Henry David Thoreau

Fender Champion 600 Review

Looking for a versatile amp that can handle a variety of genres? The Fender Champion 600 might be just what you need. This amp is perfect for home use, practicing, and even small gigs. In this review, we will take a closer look at the features of the Champion 600 and see how it stacks up against the competition.
Fender Champion 600 ReviewLooking for an electric guitar amplifier that packs a punch? Check out the Fender Champion 600. This powerful little amplifier is perfect for those looking to rock out. With 5 watts of power, this amp can easily fill a small room. The one 6″ Special Design driver with ceramic magnet provides plenty of sound, and the one channel makes it easy to get the perfect sound.
The controls are simple, with just a volume knob, making it easy to get the perfect sound every time. The tube preamp and power amp give this amp a warm, natural overdrive that sounds great when turned up. The 1950s-inspired cosmetics give this amp a vintage look, while the leather strap handle and jeweled pilot light add a touch of class. If you’re looking for an electric guitar amplifier that sounds great and looks good, then you need the Fender Champion 600.

Fender Champion 600 User Manual

Having problem? Download Fender Champion 600 instructions.

Pros & Cons of Fender Champion 600

  • Higher-gain preamp circuit
  • Choice of high-or low-gain inputs
  • Internal speaker jack
  • 1950 “two-tone” looks
  • Leather Strap Handle

  • No effects loop
  • Some may find the clean tone a bit harsh

Buyer’s Guide

Specs and Features

The Fender Champion 600 is a solid state combo amplifier that packs a lot of features into its small frame. It has two channels, clean and drive, each with its own volume control.

The clean channel has a three-band EQ, while the drive channel has a two-band EQ.
The amp also has reverb and chorus effects built in.

Specs and Features

The build quality of the Fender Champion 600 is very good. All the knobs and switches feel solid and well-built. The overall look of the amp is modern and stylish.

So how does it sound? In a word: great! The clean channel is very clear and crisp, while the drive channel gives you plenty of distortion for rock or metal tones.


The Fender Champion 600 features two channels, “normal” and “drive.” The Normal channel offers volume, treble, and bass controls, while the Drive channel has its own gain control in addition to the shared EQ. There’s also a master volume knob and a three-way toggle switch for selecting between the two input options.

In terms of tone shaping, the Champion 600 is pretty straightforward. But that’s not necessarily a bad thing – sometimes less is more. And in this case, it just means that you won’t have to spend hours tweaking settings to get the sound you want. Just dial in the amount of drive you need and adjust the EQ to taste.

One nice feature of the Champion 600 is the ability to link the two channels together. This gives you even more flexibility, as you can use the Normal channel for clean tones and the Drive channel for dirty ones. Or, if you’re feeling really adventurous, you can use both channels at the same time for a truly unique sound.

All in all, the Fender Champion 600 is a great little amp that offers a lot of bang for your buck. If you’re looking for a versatile amp that won’t break the bank, this is definitely one to consider. So go ahead and give it a try – you might just be surprised at what it can do!

Sound Quality

Now that we’ve taken a look at the controls, let’s talk about sound quality. The Fender Champion 600 is a surprisingly versatile amp. It can do everything from clean tones to high-gain distortion, and everything in between.

The Normal channel is great for clean tones. The bass and treble controls give you plenty of room to shape your sound, and the volume knob lets you dial in just the right amount of output.

If you’re looking for sparkling cleans, this is definitely the channel for you.

The Drive channel is where things start to get really interesting. This is where you’ll find the amp’s overdrive capabilities. The gain control allows you to dial in as much or as little distortion as you want, and the EQ lets you shape the sound to your liking.

And as we mentioned before, the two channels can be linked together for even more flexibility. This gives you a huge range of tones to play with, and it’s sure to please even the most demanding players.

So what does all this mean in terms of sound quality? In a word: impressive. The Fender Champion 600 is capable of some truly great sounds, and it’s easily one of the most versatile amps in its price range. If you’re looking for an amp that can do it all, this is definitely one to consider.

Who is Fender Champion 600 For

Now that we’ve taken a look at the features and sound quality of the Fender Champion 600, let’s talk about who it’s for. This amp is ideal for players who need a versatile amp that can do everything from clean tones to high-gain distortion.

Who is Fender Champion 600 For

If you’re looking for an amp to use for practice or bedroom jamming, the Champion 600 is a great option. It’s also perfect for gigging musicians who need an amp that can handle any situation. Basically, if you need an amp that’s capable of great sound and versatility, this is the one you want. [1]

How to Get a Clean Tone

The first step is to set all of the controls to their neutral or middle position. This includes the volume, tone, and gain knob. Once you have done this, you can start to experiment with different settings to find the sound that you are looking for.

If you want a cleaner tone, you will want to keep the volume and gain at a lower setting. You can then increase or decrease the treble and bass levels to find the perfect balance for your guitar.

If you want a dirtier sound, you can turn up the gain and volume knobs until you get the desired amount of distortion. From there, you can adjust the EQ settings to fine-tune your sound.


If you are having trouble getting a clean tone, there are a few things that you can try.

First, make sure that your guitar is in good condition and that the strings are fresh. If your guitar is buzzy or the strings are old, it will be difficult to get a clean sound no matter what settings you use.

Second, try using a different type of pick. If you typically use a thick pick, try switching to a thinner one. This can help to reduce the amount of noise that your guitar makes.

Third, experiment with different amp settings. Each amp is different and will respond differently to various EQ settings. Try out different combinations until you find something that works for you.

If all else fails, you can always take your guitar to a professional for a setup. They will be able to adjust the intonation, action, and other factors that can affect the sound of your guitar.


Getting a clean tone on your electric guitar is important if you want to play any type of music. By following these tips, you should be able to get a great sound out of your amp. Experiment with different settings and find what works best for you. With a little practice, you’ll be playing like a pro in no time!


Does Fender Champion take pedals well?

The Fender Champion is a great amp for those who want to experiment with different sounds. It has a versatile range of tones and can take pedals well. If you are looking for an affordable and reliable amp, the Fender Champion is a great option.

Now that we’ve gone over how to get a clean tone out of your electric guitar, let’s talk about something else that is important: taking pedals well. Many guitarists like to use pedals to create different sounds. If you are planning on using pedals, you’ll want to make sure that your amp can handle them.

Fortunately, the Fender Champion is designed to take pedals well. This means that you won’t have to worry about your sound being distorted or muffled. You can experiment with different pedals to find the perfect sound for your playing style. [2]

Does the Fender Champion have a built in tuner?

No, the Fender Champion does not have a built in tuner. However, there are many aftermarket options that you can purchase to add this feature. If you plan on using pedals, we recommend getting an external tuner so that you can ensure that your guitar is always in tune.

How many watts is a Fender Champ?

The Fender Champ is a five-watt amplifier, which means it can produce enough volume for most small venues and practice spaces. It’s also relatively inexpensive, making it a great option for beginner guitarists.

The Champ has a single channel, which means it can only be used for one sound at a time. However, it’s simple controls make it easy to dial in a variety of tones. The amp has two inputs (one for instrument and one for microphone), as well as controls for volume, tone, and reverb.

The Fender Champ is a versatile amplifier that can be used for a variety of styles. It’s well-suited for blues and rock, but can also produce clean tones when needed. Thanks to its low price and simple controls, the Champ is an excellent choice for beginner guitarists. [3]

What does PWR mean on an amp?

PWR is an abbreviation for power. On an amplifier, this refers to the amount of power that the amp can produce. The higher the wattage, the louder the amp will be. If you plan on playing in large venues or with a lot of distortion, you’ll need an amp with more power. However, if you only plan on playing at home or in small clubs, a lower-wattage amp will be just fine.

What does PWR mean on an amp?

In general, amplifiers with more watts will be more expensive than those with less watts. This is because they require more components and are more powerful. If you’re just starting out, we recommend getting an amp with around 50 watts. This will be plenty of power for most situations. [4]

Is the Fender champion a tube?

No, the Fender Champion is not a tube amplifier. Tube amps are usually more expensive and require more maintenance than solid state amps. However, they are often seen as being better sounding. If you’re looking for a tube amp, we recommend checking out the Fender Hot Rod Deluxe.

What is the difference between Fender Champion and Mustang?

The Fender Champion and Mustang are two of the most popular amps on the market. Both are made by Fender, but they have different features that set them apart.

The Fender Champion is a solid state amp, while the Mustang is a tube amp.
This means that the Mustang will require more maintenance than the Champion. However, it also means that the Mustang can produce a wider range of tones.

The Champion has one channel, while the Mustang has two channels. This allows you to switch between clean and distorted sounds without having to purchase a separate pedal. The Mustang also has built-in effects, whereas the Champion does not.

In terms of price, the Champion is usually less expensive than the Mustang. However, this varies depending on the model and features that you choose.

Both the Champion and Mustang are excellent amps that can be used for a variety of genres. If you’re looking for an amp with more versatility, we recommend the Mustang. However, if you’re on a budget, the Champion is a great option. [5]

Related Video: Fender Champ 600 quick demo


The Fender Champion 600 is a versatile amp that can handle just about any genre of music. It’s perfect for home use, small gigs, and even recording. With its two channels and plethora of features, the Champion 600 is sure to become a favorite in your amplifier collection. If you’re looking for an amp that can do it all, the Fender Champion 600 should be at the top of your list. Thanks for reading our review!


  1. https://www.justguitaramps.com/reviews/fender-champion-600/
  2. https://guitarspace.org/amps/fender-champion-100-review/
  3. https://www.sweetwater.com/store/detail/Champion600–fender-champion-600
  4. https://www.sweetwater.com/insync/power-amp-input/
  5. https://guitarspace.org/amps/fender-champion-vs-mustang/