Looking for a bass amp that can really pack a punch? Look no further than the Fender Bassbreaker 007. This amp is built for bassists who want to push their sound to the next level. Featuring a vintage-style treble-booster circuit, the Bassbreaker 007 adds pre-amp gain and additional harmonics to your tone, giving you a dirty, distorted sound that will set you apart from the rest.Fender Bassbreaker 007 User Manual
Pros & Cons of Fender Bassbreaker 007
Buyer’s Guide
What is a Bassbreaker?
The Fender Bassbreaker is a powerful tube amplifier that is perfect for the modern musician. This amp has everything you need to get your tone dialed in, from classic cleans to high-gain distortion. The Bassbreaker also features a built-in reverb and delay, allowing you to add depth and dimension to your sound. In this review, we will take a closer look at the features of the Bassbreaker and see how it stacks up against other amps in its class.
The Bassbreaker 007 comes equipped with two 12AX& preamp tubes and two EL84 power tubes. The amp also features a spring reverb tank and an effects loop.
The Fender Bassbreaker is a great choice for the modern musician who wants classic tones with today’s technology. If you’re looking for an amp that can do it all, the Bassbreaker is the perfect choice for you. [1]
Why do I need a Bassbreaker?
Bassbreakers are designed to give you the best of both worlds: the power of a tube amplifier with the flexibility of modern features. With three channels, each with its own EQ, you can get any sound you want out of this amp. And if you’re looking for even more power, the Bassbreaker 00’s have an output that can be switched between seven and fifteen watts.
So whether you’re playing gigs at small clubs or arenas, the Fender Bassbreaker 007 will give you the sound you need.
Specs and Features
The Bassbreaker 007 is a tube combo amplifier with three 12AX(Axis) preamp tubes and two EL84 power tubes. It has two channels, each with its own volume control. The Clean channel has a two-band EQ, while the Drive channel has a three-band EQ.
Both channels share a global presence control and master volume control. The amp also features an effects loop and foot-switchable boost function.
The Bassbreaker 007 is rated at 30 watts RMS into eight ohms or 50 watts RMS into four ohms.
In terms of specs and features, the Bassbreaker 007 is a very solid amp. It has plenty of power for most gigging situations and the two channels give you a lot of flexibility in terms of tone.
The EQ controls are very user-friendly and the effects loop is a nice touch. The foot-switchable boost function is also a great feature, particularly if you’re using the amp for recording purposes.
The Main Controls
The three main controls on the Bassbreaker 007 are the volume controls for each channel and the master volume control. The two volume controls function independently, so you can have one channel cranked up while keeping the other channel at a lower volume.
This is a great feature if you want to use the amp for both clean and dirty tones. The master volume control regulates the overall output of the amp.
The three-band EQ on the Drive channel gives you a lot of control over your sound. The bass and treble controls are very responsive and allow you to dial in a wide range of tones.
The middle control is labeled “cut” and allows you to reduce the midrange frequencies. This can be a great way to tame a muddy or overbearing sound.
The two-band EQ on the Clean channel is very straightforward. The treble and bass controls function exactly as you would expect them to.
The global presence control allows you to adjust the high-end response of the amp. This can be a great way to add some sparkle to your clean tones or tighten up your drive tones.
The effects loop is a nice feature, particularly if you’re using external pedals or processors. It allows you to insert those devices into the amplifier’s signal path without affecting the tone of the amp itself.
The foot-switchable boost function is a great feature for recording purposes. It allows you to add extra volume and gain to your sound without having to turn up the amp’s volume.
Sound Quality
The Bassbreaker 007 sounds great. The clean channel has a very rich and full sound. The Drive channel has a lot of punch and power.
The EQ controls are very effective and allow you to dial in a wide range of tones. The effects loop is transparent and doesn’t color your sound.
The foot-switchable boost function is a great way to add extra volume and gain without sacrificing tone quality. Overall, the sound quality of the Bassbreaker 007 is excellent.
How To Get The Best Sound Out of your Bass Amp
Now that you know how the controls on your Bassbreaker 007 work, let’s talk about how to get the best sound out of your amp.
There are a few things you can do to get the most out of your Bassbreaker 007. First, make sure the EQ controls are set properly. Second, use the effects loop if you’re using external pedals or processors.
Third, take advantage of the foot-switchable boost function when recording. And fourth, experiment with different settings and find what sounds best for you.
The Bassbreaker 007 is a great sounding amp and with a little bit of tweaking, you can get it to sound even better. So don’t be afraid to experiment and find what works best for you.
Fender Bassbreaker 007 Set Up
Now that you know how to get the best sound out of your Bassbreaker 007, let’s talk about how to set it up.
First, you’ll need to connect your bass to the amp. You can do this by using a standard instrument cable. Next, you’ll need to connect your speakers to the amp.
You can use either one or two speakers with the Bassbreaker 007.
Once your speakers are connected, turn on the power switch and then turn up the volume control until you reach your desired level.
Now that your Bassbreaker 007 is set up, you’re ready to start playing. Enjoy! [2]
Fender Bassbreaker 007 Positioning
Let’s talk about position now that you’ve got your Bassbreaker 007 put up.
The best way to position your Bassbreaker 007 is by using it as a floor monitor. This will allow you to hear yourself better and will also help project your sound out into the room.
If you’re using one speaker, position it so that the tweeter is pointing towards your head. If you’re using two speakers, Position them so that each speaker is pointing towards each of your ears.
Fender Bassbreaker 007 Protection
Now that you have your Bassbreaker 007 set up and positioned, let’s talk about protection.
The best way to protect your Bassbreaker 007 is by using a speaker cover. This will help keep your amp clean and free of dust and dirt.
It’s also a good idea to keep your amp away from direct sunlight and heat sources. These can damage the internal components of your amp and shorten its lifespan.
Fender Bassbreaker 007 Maintenance
Let’s speak about upkeep now that you’ve got your Bassbreaker 007 installed and safeguarded.
The best way to maintain your Bassbreaker 007 is by regularly cleaning it. You can use a soft cloth or brush to remove dust and dirt from the surface of your amp.
It’s also a good idea to occasionally vacuum the inside of your amp to remove any dust or debris that may have gotten inside.
By following these simple tips, you can keep your Bassbreaker 007 in top condition and sounding great for years to come.
FAQ
How heavy is the Fender Rumble 25?
The Fender Rumble 25 weighs in at 25.5 pounds.[3]
Is a 25 watt bass amp enough?
The Fender Rumble 25 is a great sounding amp and with a little bit of tweaking, you can get it to sound even better. However, if you’re looking for a bit more power, you may want to consider getting a higher wattage amp.
Does Rumble 25 have Bluetooth?
No, the Fender Rumble 25 does not have Bluetooth.
How do you equalize a bass amp?
First, make sure the EQ controls are set properly. Second, use the effects loop if you’re using external pedals or processors.
Third, take advantage of the foot-switchable boost function when recording. And fourth, experiment with different settings and find what sounds best for you.
Should a bass amp be on the floor?
The best way to position your Bassbreaker 00(seven) is by using it as a floor monitor. This will allow you to hear yourself better and will also help project your sound out into the room.
If you’re using one speaker, position it so that the tweeter is pointing towards your head. If you’re using two speakers, Position them so that each speaker is pointing towards each of your ears.
Does Fender Rumble have Di?
No, the Fender Rumble 25 does not have a DI output. However, it does have an effects loop which you can use to connect your pedals or processors. Additionally, the foot-switchable boost function can be used when recording.[4]
How do you make a deep bass guitar sound?
With the Fender Bassbreaker 00, you get a tube amplifier that gives you the power to create some of the deepest bass tones imaginable. This amp is perfect for modern bass players who need an amp that can keep up with their heavy playing style.
The Bassbreaker 00 comes equipped with two 12AX seven-pin preamp tubes and two EL84 output tubes. These allow the amp to produce up to 30 watts of pure power. With this much power at your disposal, you’ll be able to create some truly massive bass tones. [5]
Related Video: Fender Bassbreaker 007 1×10 7 watt combo
Conclusion
The Fender Bassbreaker 007 is a versatile, all-tube amp head that’s perfect for gigging guitarists. With seven different channels to choose from and plenty of power on tap, this head can handle any style of music you might want to play. Add in the built-in effects loop and reverb tank, and you have everything you need to take your tone from clean to crunchy and back again. If you’re looking for an affordable all-tube amp head that can do it all, the Fender Bassbreaker 007 should be at the top of your list. Have you tried one out yet?
References:
- https://www.fender.com/en/guitar-amplifiers/vintage-pro-tube/bassbreaker/
- https://www.fender.com/en-IT/guitar-amplifiers/vintage-pro-tube/bassbreaker-007-combo/2260006000.html
- https://www.fender.com/en-LU/bass-amplifiers/contemporary-digital/rumble-25/2370206900.html
- https://www.talkbass.com/threads/fender-rumble-500-xlr-line-output.1177040/
- https://www.izotope.com/en/learn/how-to-get-a-fat-deep-bass-sound.html